Use the Privacy Mode, if you would like to deactivate the whole system, i.e. recording and any kind of camera access is rendered impossible until you deactivate this mode. While this lock can be deactivated directly from this computer, you will need the user name and password set in this dialog to deactivate the lock from a different computer. Note that the cameras are also signaling this operating mode by a specific LED blinking pattern.
To activate this mode, enter a user name and password, then click on the Set button.
Caution: This mode becomes effective immediately after you click on the Set button. If you would like to access the camera again, you need to use the access data you defined when activating the Privacy Mode.
The different MOBOTIX cameras are displaying the following blinking patterns once they have been switched to Privacy Mode:
|Camera Type||LEDs||Blinking Pattern|
|Cameras with four LEDs||
LED 0 flashes red every 3 seconds
|Cameras with two LEDs||
LED 0 flashes green every 3 seconds
Proceed as follows to deactivate the Privacy Mode:
http://<camera IP address>/admin/privacymode).
|User Name||The user name for accessing the camera if the Privacy Mode is active.|
|Login Password||The password for accessing the camera if the Privacy Mode is active.|